Installation Sheet
Customer Service: 800-626-1126 | rev-a-shelf.com
2
FIG. 1
Screws installed to the oor
Disengage cabinet slide
assembly from unit by
pressing release levers on the
two vertical slides and pulling
unit away from cabinet slide
assembly (See Figure 1).
NOTE: Center slide does
not have a release lever, pull
strongly to separate.
STEP 1
STEP 2
Center cabinet slide assembly
on cabinet oor 7/8” from
front outside edge of cabinet
(See Figure 2).
Note: If installing into a
cabinet with an inset door,
move the slide assembly
back additionally the
thickness of the door.
FIG. 2
STEP 3
Mount cabinet slide assembly
to cabinet oor with (4) #8 x
3/4” screws (See Figure 3).
FIG. 3
7
64
3
32
2
mm
#2
#2
7/8”