Use and Care Guide

Installation Instructions

448 Series

Pull-Out Base Organizers

2409 Plantside Drive

Jeffersontown, KY 40299

800-626-1126

www.rev-a-shelf.com

I-448WC 6/05

Step 1. Predrill two holes in floor of wall cabinet, centered, one towards the front and 

 one towards the rear

Step 2. Center unit on cabinet floor, align front edge to inside edge of 

 face frame (see fig. 1).



Step 3. Screw from underside of cabinet into block of wood (see fig.2). Screws not provided.

Step 4. Attach door to unit. Note: utilize the adjustable door mounting brackets to

 ensure mounting in thick portion of cabinet door (see fig. 3).

fig. 3

fig. 1

Thick portion of door.

fig. 2

Screw from

underside of

cabinet.

NOTE: The extra set of chrome rails

(included) are for use in a 36" or 42"

height wall cabinet for additional

shelf space. Holes are predrilled.

PAGE 1
Installation Instructions 448 Series Pull-Out Base Organizers Step 1. Predrill two holes in floor of wall cabinet, centered, one towards the front and one towards the rear Step 2. Center unit on cabinet floor, align front edge to inside edge of face frame (see fig. 1). Step 3. Screw from underside of cabinet into block of wood (see fig.2). Screws not provided. Step 4. Attach door to unit. Note: utilize the adjustable door mounting brackets to ensure mounting in thick portion of cabinet door (see fig. 3).