Installation Sheet

Customer Service: 800-626-1126 | rev-a-shelf.com

Remove existing drawer box

from cabinet by squeezing

the drawer locking devices

and pulling the drawer box

forward.

Using a pencil trace around

the bottom two corners of the

drawer and onto the back of

the drawer front.

Remove the screws that secure

the drawer front to the drawer

box. Also remove the two

drawer locking devices by

removing the two screws

that secure each locking device

to the bottom front edge of

the drawer box. Discard the

existing drawer box.

STEP 1

Remove the slide triggers from

their wrapping.

Turn your wood two–tiered

drawer box over and locate the

pre-drilled holes on the front

lip of the box.

Using the provided screws,

attach your left and right sided

triggers.

NOTE

Release triggers are side

sensitive and are marked with

an “L” & “R” for Left and Right.

STEP 2

Bottom view

FIG.

Note: Not all existing drawer boxes will have release triggers like the ones shown in FIG 1. A EURO Roller slide or various other

drawer slides may be used and involve alternate removal methods. If your existing Drawer box is without triggers underneath the

box, their may be locking devices located on the slides elsewhere.