Installation Instructions

ManualsBrandsRev-A-Shelf ManualsCabinet Organization & AccessoriesSmall Flat Metal Door Mount Spice Rack

INSTALLATION INSTRUCTIONS: DOOR MOUNT SPICE RACK

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

DOOR MOUNT SPICE RACK

TOOLS REQUIRED:

10 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

Clean with a damp cloth and

wipe parts dry.

I-5365-1118

#2#2#2

WATCH TUTORIALS OF OUR

PRODUCTS BEING INSTALLED

WWW.REV-A-SHELF.COM/VIDEOS

PARTS LIST

No. Description Qty.

A Spice Rack Unit 1

B #6 x 1/2” Flat Head Screws 4

Summary of content (4 pages)

PAGE 1
2400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 DOOR MOUNT SPICE RACK TOOLS REQUIRED: #2 ESTIMATED ASSEMBLY TIME: 10 MIN CARE AND MAINTENANCE: Clean with a damp cloth and wipe parts dry. PARTS LIST No. Description Qty. A Spice Rack Unit 1 B #6 x 1/2” Flat Head Screws 4 A B WATCH TUTORIALS OF OUR PRODUCTS BEING INSTALLED WWW.REV-A-SHELF.
PAGE 2
STEP 1 Measure and mark the center of the cabinet door (See Figure A). FIG. A Door STEP 2 Using the mark from Step 1, center the product and adjust the mounting brackets to the desired height and tighten. Note: Make sure to install to the thick portion of the door. *5365 requires 2-1/2” of clearance behind door. *Existing shelves may need to be modified to allow space for these bins and items stored within.
PAGE 3
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 INSTRUCCIONES DE INSTALACIÓN / LES INSTRUCTIONS D’INSTALLATION ESPECIERO PARA MONTAR EN PUERTA / ÉTAGÈRE À ÉPICES MURALE HERRAMIENTAS REQUERIDAS OUTILS REQUIS #2 TIEMPO ESTIMADO DE ENSAMBLADO: DURÉE DE L’INSTALLATION: 10 MIN CUIDADO: ENTRETIEN: Limpie con un paño húmedo y seque las partes. Nettoyer avec un chiffon humide et essuyer pour sécher complètement. Lista de Parts/Liste des Pièces No.
PAGE 4
PASO 1 / ÉTAPE 1 Medir y marcar el centro de la puerta de la alacena (Ver figura A). FIG. A Puerta Mesurez et marquez le centre de la porte du placard (Voir l’image A). Porte PASO 2 / ÉTAPE 2 Usando la marca del paso 1, centrar el producto y ajustar los soportes del montaje a la altura deseada, y apretar. Nota: Asegúrese de instalar en la parte gruesa de la puerta.