User Guide

Pull Down Shelving System
Installation Instructions
Part # 5PD-24C, 5PD-36C
Hole Pattern for Side Mounting
1. Mount the bottom mount brackets to the cabinet
floor ensuring that bolts with washers are coming
up through bottom of cabinet.
1. Mount the side frames
to the walls of the cabinet.
Attach pull rod to side
frames. Proceed to Step 3.
2. Mount the side frames to the bottom brackets.
Attach pull rod to side frames. Proceed to Step 3.
Bottom Mounting
Inner Cabinet Minimum Widths:
5PD-24C = 22-3/8" (569 mm)
5PD-36C = 34-3/16" (869 mm)
Side Mounting
Inner Cabinet Widths:
5PD-24C = 22-3/16" (564 mm)
5PD-36C = 34" (864 mm)
Over
Hole Pattern for Bottom Mounting
B
O
T
T
O
M
M
O
U
N
T
I
N
G
S
I
D
E
M
O
U
N
T
I
N
G
Thank you for purchasing the Pull-Down Shelving System.
Please familiarize yourself with the components listed in the
adjoining table. Also note that this unit can be mounted
to the bottom or to the side of the cabinet.
No. Quantity Description
1 2 pcs  Bottom Mount Brackets
2 4 pcs  Bolts
3 4 pcs  Nuts
4 4 pcs  Washers
5 2 sets  Side Frames
6 1 pc  Pull Rod
7 1 pc  Brace
8 2 pcs  Plate Racks
9 8 pcs  Shelf Pins
10 2 pcs  Support Bar (screw)
11 3 pcs  Support Bar
Note: this is a maximum
dimension which is
effected by height of the
face frame lip in face frame
applications. Adjust as
neccessary.