Instructions / Assembly

INSTALLATION INSTRUCTIONS

REQUIRED WHEN MOUNTING FULL ROUND 6070 UPPER PANTRY SHELF

SYSTEM DIRECTLY ABOVE 6060 SERIES LOWER PANTRY SHELF SYSTEM

1. Using template provided, drill four (4) each 7/32" diameter holes through the mounting

panel.

2. Use four (4) each 10-32 by 1" oval head self-tapping screws to fasten mounting flange

to the positioner assembly.

3. Locate screw holes with template provided and install lower mounting flange for the

Lower Pantry Shelf System with four (4) each 3/4" by 8 oval head screws.*

4. Proceed with steps 2-5 of the installation instructions for the 6060 series Lower Pantry

Shelf System.

5. Locate screw holes with template provided and install upper pivot support for the Upper

Pantry Shelf System with four (4) each 1/2" by 8 truss head screws.

6. Proceed with steps 3-5 of the installation instructions for the 6070 series Upper Pantry

Shelf System

* Mounting flanges are tapped for jack screw accessory. If used, drill 1" diameter hole through

bottom floor only.

I 2-598 rev 08/06

2400 Earl Jones Way Louisville, KY 40299

(800) 626-1126 • rev-a-shelf.com

PAGE 1
INSTALLATION INSTRUCTIONS REQUIRED WHEN MOUNTING FULL ROUND 6070 UPPER PANTRY SHELF SYSTEM DIRECTLY ABOVE 6060 SERIES LOWER PANTRY SHELF SYSTEM 1. Using template provided, drill four (4) each 7/32" diameter holes through the mounting panel. 2. Use four (4) each 10-32 by 1" oval head self-tapping screws to fasten mounting flange to the positioner assembly. 3.
PAGE 2
INSTALLATION INSTRUCTIONS INDEPENDENTLY ROTATING 16" FULL ROUND 6070 SERIES UPPER PANTRY SHELF SYSTEM 1. Locate screw holes with template provided to install bottom positioner on cabinet floor with four (4) each 3/4" by 8 oval head screws. 2. Locate screw holes with template provided to install upper pivot support with four (4) each 3/4" by 8 truss head screws. 3. Insert bottom end of shaft thru upper shelf and assemble collar. Repeat for bottom shelf. 4.