Installation Instructions

ManualsBrandsRev-A-Shelf ManualsKitchen28 in. Banded Wood Kidney Lazy Susan with Steel Bearing

INSTALLATION INSTRUCTIONS: BANDED WOOD LAZY SUSAN

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

BANDED WOOD LAZY SUSAN

TOOLS REQUIRED:

15 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

Clean with a damp cloth and

wipe parts dry.

I-LD-4BW-0819

#2#2#2

WATCH TUTORIALS OF OUR

PRODUCTS BEING INSTALLED

WWW.REV-A-SHELF.COM/VIDEOS

Parts List

No. Description Qty

A Sized Tray 1

B #8 x 1-1/4” Phillips Flat Head Screws 4

C Cover Cap 1

B.A.

*Shape will depend

on unit purchased

*Full circle and D-shape only

Summary of content (4 pages)

PAGE 1
2400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 BANDED WOOD LAZY SUSAN TOOLS REQUIRED: #2 ESTIMATED ASSEMBLY TIME: 15 MIN CARE AND MAINTENANCE: Clean with a damp cloth and wipe parts dry. Parts List No. Description Qty A Sized Tray 1 B #8 x 1-1/4” Phillips Flat Head Screws 4 C Cover Cap 1 *Full circle and D-shape only A. B. C. WATCH TUTORIALS OF OUR PRODUCTS BEING INSTALLED *Shape will depend on unit purchased WWW.REV-A-SHELF.
PAGE 2
STEP 1 FIG. 1 Tribase Ensure tribase (back plate) is locked into correct position. You will hear a distinct click when locked into place. (See Figure 1). Note: Does not apply to full circle trays. STEP 2 D-Shape start position Install the shelf by tilting it in a diagonal position, then ease it through the cabinet opening and place it against the cabinet floor (See Figure 2). Kidney-Shape start position FIG.
PAGE 3
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 INSTRUCCIONES DE INSTALACIÓN / LES INSTRUCTIONS D’INSTALLATION ESTANTES DE MADERA VETEADA CON BANDEJAS GIRATORIAS (LAZY SUSAN) BOIS BANDÉ LAZY SUSAN Herramientas requeridas: Outils Requis: #2 Tiempo estimado de ensamblado Durée de l’installation: 15 MIN Cuidado/ Entretien: Limpie con un paño húmedo y seque las partes. Nettoyer avec un chiffon humide et essuyer pour sécher complètement.
PAGE 4
PASO 1 / ÉTAPE 1 FIG. 1 Tribase Asegúrese de que la tribase (placa posterior) esté bloqueada en la posición correcta. Cuando este asegurado en su lugar, escuchará un clic característico. (Ver Figura 1). Nota: No se aplica a bandejas circulares. Assurez-vous que la base (plaque arrière) est verrouillée dans la bonne position. Vous entendrez un clic distinct lorsqu’elle sera bien en place. (Voir la figure 1). Remarque : ne s’applique pas aux plateaux circulaires complets.