Installation Sheet

INSTALLATION INSTRUCTIONS: 24”, 28”, 32” KIDNEY SHAPED LAZY SUSANS
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
24”, 28”, 32” KIDNEY SHAPED LAZY SUSANS
I-KIDNEY-BASE-1120
Locate the mounting holes with the template
(see reverse side) and a fx the positioner base
assembly to the cabinet oor with (4) #8 x 3/4”
oval head screws (See Fig. 2).
Note: Shaft adjustment screw must face
cabinet opening.
Note: Wood only, polymer trays skip to step 2.
Insert the bottom shelf support hub into the tray
from the bottom and the top shelf support hub
from the top with the keyways facing the rear of
the tray, then attach them with (3) #8 x 3/4” self-
tapping pan head screws (See Fig. 1).
STEP 2
STEP 1
Insert the upper shaft assembly into the top end
of the shaft. Loosely install the adjustment screw.
Insert the shaft/tray assembly into the
bottom positioner. Extend the upper shaft
assembly to engage the upper pivot support.
Adjust the upper shelf position by grasping and
supporting the upper shelf positioner assembly
while loosening the adjustment screw. Rotate the
positioner and shelf into alignment and securely
tighten the adjustment screw.
STEP 3
STEP 4
Locate the mounting holes with the template and
a fx the top pivot support to the underside of the
cabinet top with (4) #8 x 1/2” pan head screws
(See Fig. 2).
Working from bottom up, slide the upper shelf
onto the shaft. Slide the upper positioner
assembly onto the shaft and temporarily tighten
the screw with the positioner approximately 15”
from the bottom of the shaft. Slide the bottom
shelf onto the shaft.
STEP 5
STEP 6
Top Shelf Support Hub
Bottom Shelf Support Hub
FIGURE 1
1" IND.
1" IND.
1" IND.
1" IND.
1" IND.
1" IND.
32-1/865400-32 4-1/8 22-1/16
31-3/421-15/166-1/164-1/164WLS
28-1/818-7/164-3/835401-28
WOOD
CHROME
CHROME
WOOD 4WLS
WOOD 4WLS
1" IND.
SHAFT
SYSTEM
22-7/16 324-1/46400-32 6-7/1632" KIDNEY
1" IND.
3122-3/47-1/44-5/84400-31
WOOD
WOOD
POLYMER
18-5/8 2836400-28 4-11/1628" KIDNEY POLYMER
14-5/16 241-1/26400-24 2-5/16
1" IND.
1" IND.14-1/4 23-15/161-7/16 2-1/2
18-1/4 27-3/42-7/8 4-3/8
24" KIDNEY POLYMER
1811-13/162-13/161-3/46401-18POLYMER18" KIDNEY
DCBAPART #MAT'LTRAY
D
B
C
A
KIDNEY
IND = INDEPENDENT ROTATING
1" IND.
1" IND.
1" IND.
1" IND.
1" IND.
1" IND.
32-1/865400-32 4-1/8 22-1/16
31-3/421-15/166-1/164-1/164WLS
28-1/818-7/164-3/835401-28
WOOD
CHROME
CHROME
WOOD 4WLS
WOOD 4WLS
1" IND.
SHAFT
SYSTEM
22-7/16 324-1/46400-32 6-7/1632" KIDNEY
1" IND.
3122-3/47-1/44-5/84400-31
WOOD
WOOD
POLYMER
18-5/8 2836400-28 4-11/1628" KIDNEY POLYMER
14-5/16 241-1/26400-24 2-5/16
1" IND.
1" IND.14-1/4 23-15/161-7/16 2-1/2
18-1/4 27-3/42-7/8 4-3/8
24" KIDNEY POLYMER
1811-13/162-13/161-3/46401-18POLYMER18" KIDNEY
DCBAPART #MAT'LTRAY
D
B
C
A
KIDNEY
IND = INDEPENDENT ROTATING
Top Shelf Support Hub, 6260-18-2
#8-32 X 5/8” Pan Head Screws (3 Total),
M1810-32-2TF-PF
Bottom Shelf Support Hub, 6470-17-2
Upper Shaft, 6661-09-0904-26
Upper Pivot Support, 6000-91-2
Retainer, 6470-57-2
#8 x 1/2” Pan
Head Wood
Screw (4 Total)
F0808-26-2
#8 X 3/4” Oval Head
Wood Screw, F1208-13-2
Positioner Base, 6260-78-2
Lower Shaft, 6260-05-2208
Telescoping Shaft
Adjustment Screw
M2408-409-2,
1/4-20 X 1/2” Screw
Bottom Adjustment Screw,
M2408-409-2, ¼-20 X ½” Screw
FIGURE 2