Installation Instructions

ManualsBrandsRev-A-Shelf ManualsKitchen19 in. H x 11 in. W x 22 in. D Single 35 Qt. Pull-Out Silver and Chrome Waste Container with Rear Basket

INSTALLATION INSTRUCTIONS: 35 QT. WASTE CONTAINER PULLOUT

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

RV-SERIES 35 QT. WASTE CONTAINER PULLOUT

I-RVKDRB-1018

TOOLS REQUIRED:

15 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

Clean with a damp cloth and wipe

parts dry.

PARTS LIST

No. Description Qty.

A Handle 1

B Rear Basket 1

C Frame 1

D Uprights 2

E Waste Container 1

F #8 x 3/4” Truss Head Screws 4

WATCH VIDEO TUTORIALS OF

PRODUCT INSTALLATIONS

WWW.REV-A-SHELF.COM/VIDEOS

Summary of content (4 pages)

PAGE 1
2400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 RV-SERIES 35 QT. WASTE CONTAINER PULLOUT TOOLS REQUIRED: #2 ESTIMATED ASSEMBLY TIME: 15 MIN PARTS LIST CARE AND MAINTENANCE: Clean with a damp cloth and wipe parts dry. No. Description Qty. A Handle 1 B Rear Basket 1 C Frame 1 D Uprights 2 E Waste Container 1 F #8 x 3/4” Truss Head Screws 4 A C B D E F WATCH VIDEO TUTORIALS OF PRODUCT INSTALLATIONS WWW.REV-A-SHELF.
PAGE 2
STEP 1 Begin by setting the frame inside the cabinet. Locate the position of where you would like it to be mounted. FIG. A Note: Look to make sure that there is no interference with the cabinet door when opening and closing. STEP 2 With the frame in the closed position, insert the front (2) #8 x 3/4”screws, making sure that the frame is square to the front of the cabinet. Then install the (2) #8 x 3/4”rear screws (See Figure A). #2 STEP 3 FIG.
PAGE 3
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 INSTRUCCIONES DE INSTALACIÓN INSTRUCTIONS D’INSTALLATION CONTENEDOR DE BASURA EXTRAÍBLE DE 33 L RV-SERIES POUBELLE COULISSANTE DE 35 QUARTS HERRAMIENTAS REQUERIDAS: OUTILS REQUIS: #2 TIEMPO ESTIMADO DE ENSAMBLE: DUREE ESTIMEE DE L’ASSEMBLAGE: 15 MIN Lista de partes / Liste des pièces CUIDADO Y MANTENIMIENTO: ENTRETIEN ET MAINTENANCE: Limpie con un paño húmedo y seque las partes.
PAGE 4
PASO 2 / ÉTAPE 2 FIG. A Con el marco en la posición cerrada, inserte los (2) tornillos #8 x 3/4” de la parte delantera, asegurándose de que el marco esté en el mismo nivel en la parte delantera de la alacena. Luego coloque los (2) tornillos #8 x 3/4” posteriores (ver imagen A). Le cadre en position fermée, insérez les vis avant (2) No 8 x ¾ po, en vous assurant que le cadre soit à égalité avec le devant de l’armoire. Ensuite, installez les vis arrière (2) No 8 x ¾ po (voir figure A).