D-Series With you on the front line Quick Start Guide V 1.
Contents Introduction Introduction Congratulations on purchasing the D-Series next generation body worn camera. Quick start Charge Choose your Mount Klickfast stud (using attach & removal tool) Klickfast stud (attach & removal without tool) Shirt / pocket clip Record This quick start guide will show you the basics and get you up and running with your D-Series camera in 3 easy steps.
Quick start 1 Quick Start Charge Klickfast stud (using attach & removal tool) The USB charging and data connector is located at the bottom of the camera. Any standard USB wall charger can be used to charge the D-series with the USB cable supplied in the box. The D-Series camera is supplied with a small tool in box to assist attachment and removal of the klickfast stud. Simply align the tool with the klickfast stud and the groove on rear of D-Series, and push upward to click stud into place.
Quick start Quick start Klickfast stud (attach & removal without tool) Shirt / pocket clip The klickfast stud can also be attached by pushing the clip into place without using the tool. Removal of the klickfast stud requires a flat head screwdriver, which is used to lever up the clip tongue, and the gently slide downwards to remove. To attach the shirt clip, simply align the attachment to the rear groove on the D-Series and slide and clip, as per diagrams below.
Quick start 3 Operation Record Camera Articulation To record video footage, simply slide the red switch down to start capturing. The D-Series camera head is able to rotate horizontally and vertically within limits. However, DO NOT OVER ROTATE! The D-Series will beep 3 times in quick succession to indicate it has started recording, and the LED on the shoulder of camera will start flashing red to indicate it is recording.
Operation Operation Playback (on camera) Go back Press the FUNCTION button to turn the camera on, and then press the PLAY button (button 9) to open playback mode. Press the FUNCTION button to leave the playback mode and return to preview screen. In the playback menu, any recorded video footage in the camera is displayed as thumbnails on the display screen. Press the FUNCTION button twice to exit the Enter Pin screen and return back to preview screen.
Operation Operation Stealth mode Picture taking mode In this mode, the D-Series displays no image on screen and the red LED is not lit. The D-Series appears off! There are no audio alarms except for the power on chime. The D-Series can take single image photos when in either preview mode (i.e. not recording) or in pre-record mode (also not recording) by pressing the FUNCTION button (i.e. button 2) and button 5 on the right of the device screen simultaneously.
Operation Optional camera settings LED Light Notification Through DEMS DEMS is Reveal’s industry leading digital evidence management platform built to securely store, manage and export digital evidence, large or small, whilst always remaining incredibly simple and easy to use. Power on Solid red light In the DEMS administration window select the Reveal camera settings tab NOTE: Requires DEMS 360 or later.
Optional camera settings Optional camera settings DEMS adminstration window Additional LED Light Notification USER RETENTION POLICY MEDIA CATEGORIES TEAMS LIBRARY CAMERA SETTINGS REVEAL CAMERA ENCRYPTION CASES ADMINISTRATION USER ROLES DEPARTMENTS EMAIL SETTINGS AUDIT LOG BOOKING LOG LOCATIONS USER PERMISSIONS NOTIFICATIONS LICENCE ERRORS REPORTS LOGOUT FILES IN TRANSFER SETTINGS CAMERA SETTINGS The following LED light notifications result from interaction with the Reveal DEMS so
Optional camera settings Optional camera settings Audio Mute • An Audio beep is heard (not heard on camera) Audio mute allows users a way to mute the audio while recording video, and here are three modes in which audio mute can function. The modes are set through DEMS 360, or RCM. • Icon showing a muted microphone is shown on screen. See location on pre-record screens below for exact placement. 1. Allow manual mute 2. Do not allow manual mute 3.
Optional camera settings Optional camera settings Viewing camera settings Wifi mode (D5 only) Firmware Version The D-Series allows you to view the settings currently active in the camera. Press the Menu button (button 3) to display the menu list of settings currently set in the camera. NOTE: menu items cannot be set directly from the camera, and must be set remotely using a computer or mobile application. Hold down button 5 to access the wifi mode menu.
Product conformance Product conformance How to recycle your equipment FCC Statement The symbol shown here and on the packaging means that the product is classed as electrical or electronic equipment, so DO NOT put it in your normal garbage bin. The D-Series complies with part 15 of the FCC Rules.
Technical specifications Technical specifications The D-Series is a fully featured camera in the Reveal product family featuring high performance video capture and on-board playback and long battery life as well as a host of connected features. Dimensions H: 100mm W: 60mm D: 26mm (thickness of device) Power/Data connection MicroUSB connector: Waterproof with metal shield for damage prevention LCD display dimensions 2.0” 4x3 262K colors (960x240 pixels), with dimmable backlight Wifi (D5 only) 802.
Notes Notes D-Series - Quick Start Guide 26 D-Series - Quick Start Guide 27
