Quick Start Guide

4
D-Series - Quick Start Guide
Charge
The USB charging and data connector is located at the
bottom of the camera. Any standard USB wall charger
can be used to charge the D-series with the USB cable
supplied in the box.
Charge your camera until the LED indicator on top of
the unit lights green. The D-Series takes approximately
6 hours with a fast charger. For a standard charger this
would take longer to reach full charge, or shorter
connected to a USB fast charger.
The D-Series can also be charged directly from the
Reveal D-Series docking station for guaranteed fast
charging.
Choose your mount
The rear of the D-Series has a moulded groove slot
which allows the attachment of clip mount accessories
to the camera. Mounting options supplied in the box
are:
1. Klickfast stud
2. Reveal single combination shirt/pocket clip
2
1
Quick start
Waterproof
micro USB
connector
5
D-Series - Quick Start Guide
Klickfast stud (using attach & removal tool)
The D-Series camera is supplied with a small tool in box to
assist attachment and removal of the klickfast stud. Simply
align the tool with the klickfast stud and the groove on rear of
D-Series, and push upward to click stud into place.
The same tool can be used to remove the
attached stud from the camera, this time
placing the tool from the top of secured
klickfast and pushing downwards to
release the stud.
Quick Start
Attachment/
Removal tool
Klickfast mount
Attach klickfast
using tool.
Remove klickfast
using tool.
Slide into groove
and click to place