Quick Start Guide

8
D-Series - Quick Start Guide
Quick start
3
Record
To record video footage, simply slide the red switch
down to start capturing.
The D-Series will beep 3 times in quick succession to
indicate it has started recording, and the LED on the
shoulder of camera will start flashing red to indicate it
is recording. A flashing red dot on the camera display
will also indicate that the camera is recording.
NOTE: the D-Series does not need to be powered on to
start recording. Simply slide down the red switch to
start recording.
To stop recording, simply slide the red switch up.
9
D-Series - Quick Start Guide
Camera Articulation
The D-Series camera head is able
to rotate horizontally and vertically
within limits. However, DO NOT
OVER ROTATE!
The D-Series camera head does not
rotate 360 degrees. Forcing it will
cause damage to the camera head.
Power ON / OFF
Power ON the unit by pressing the
FUNCTION button (button 2) for 1
second. The D-Series will sound a
welcome chime, and open into
preview mode.
In preview mode you can orientate
the camera head ready for
recording, view display and detail
such as recording resolution, time
and date, storage capacity
Power OFF the unit by pressing and
holding the same FUNCTION button
for 2 seconds.
NOTE: The D-Series can also be powered up from the off
position by sliding down red record slider. This action powers
up the camera and starts recording immediately.
Operation
2
1