Quick Start Guide

D-Series - Quick Start Guide

Stealth mode

In this mode, the D-Series displays no image on screen and

the red LED is not lit. The D-Series appears off! There are no

audio alarms except for the power on chime.

To activate stealth mode on the D-Series,

• Press and hold button 4 (i.e. middle button on right hand

side) for TWO seconds.

• To deactivate stealth mode repeat the above step by

pressing and holding button 4 for a further TWO seconds

This activates and deactivates the Stealth mode whilst the

unit is in either recording or record preview mode.

NOTE (D3 only): Button 5 is

also a stealth button, and

long press (i.e. for two

seconds) on either button 4

or 5 will switch camera into

stealth mode.

6 7 8 9

Operation

D-Series - Quick Start Guide

Picture taking mode

The D-Series can take single image photos when in either

preview mode (i.e. not recording) or in pre-record mode (also

not recording) by pressing the FUNCTION button (i.e. button

2) and button 5 on the right of the device screen

simultaneously.

Operation

A picture will be taken and placed in the DCIM folder, and

pictures can be viewed in the playback mode by pressing the

Play button and navigating to the appropriate thumbnail.

Press both buttons

simultaneously

6 7 8 9