M106/M105 Bookshelf Loudspeaker Owner’s Manual
taBLe OF COntentS About Revel Performa3 Bookshelf Loudspeakers .................................................................................................................... 2 M106/M105 Overview ............................................................................................................................................................. 3 Installation Considerations Loudspeaker Placement, Listening Room Acoustics, Acoustic Treatment Materials .............................................
m106/m105 OVerVieW Enclosure with 1"-Thick Panels and Extensive Internal Bracing 1" Aluminum Dome Tweeter with Acoustic Lens Waveguide 5.25" Aluminum Cone Woofer with Cast Frame 6.
inStaLLatiOn COnSideratiOnS Loudspeaker fidelity depends on the following three factors: loudspeaker accuracy, loudspeaker placement and listening room acoustics. Advanced Revel design features allow the M106 and M105 to achieve exceptional acoustical precision. As a result, experimenting with loudspeaker placement and listening room acoustics will have the most significant impact on the loudspeakers’ performance.
maKinG COnneCtiOnS aCOUStiC treatment materiaLS The M106 and M105 feature high-order filters that optimize the loudspeakers’ on-axis and off-axis response, minimizing sonic degradations that occur in overly “live” rooms (those with surfaces that are acoustically reflective). Placing minimal acoustic treatment materials at the room’s primary reflection points will reduce these distortions even further.
m106/m105 COnneCtiOnS adJUStmentS The M106 and M105 feature gold-plated binding posts that provide secure connection for speaker cables terminated with banana plugs, spade lugs, pin connectors or bare wire. M106/M105 Connector Panel Amplifier (one channel shown) 1. Begin playback of a familiar music or film source. 2. Listen from the primary listening position, increasing volume to a comfortable level. 3.
CaBinet FiniSH The cabinet’s wood finish does not require routine maintenance. Cabinet surfaces that have been marked with dust, fingerprints, or other dirt can be cleaned using a soft cloth – preferably micro-fiber, and high quality auto wax. Take care not to come in contact with the transducers. • Use caution to avoid contacting the rubberized trim on the sides of the loudspeaker with auto wax. If necessary, the rubberized trim can be cleaned with denatured alcohol on a microfiber cloth.
Limited Warranty A valid serial number is required for warranty coverage. This Revel warranty protects the original retail purchaser for a period of five (5) years (parts and labor) from any failure as a result of original manufacturing defects so long as: 1. The Revel products were purchased within the 50 United States, its territories or Canada. 2. The dealer from whom the Revel products were purchased was authorized to sell such products at the time of the original purchase. 3.