Owner's Manual

6
B112V2/B110V2 Subwoofer
Quick Start Guide
MAKING CONNECTIONS
CAUTION: Never make or break connections unless all
system components are powered off.
CONNECTING TO AN AV SURROUND RECEIVER OR
PROCESSOR WITH AN INTERNAL CROSSOVER
If you are connecting to a surround processor with a low-pass filtered
subwoofer output, connect the subwoofer as shown below. You can
make either a balanced (XLR) or unbalanced (RCA) connection to
either the subwoofer’s left or right input connector. When connecting
to surround processors with internal crossovers, set the Low Pass
Crossover control knob to the “LFE” position.
RR R
L
L L
SURROUND
BACK
SUBWOOFER
SURROUND CENTER FRONT
OUTPUTS
Use either XLR or
RCA connector
B112V2/B110V2
Connectors
Surround Processor
Line Outputs