Manualshelf

Installation Guide

ManualsBrandsRevell ManualsKids Tools Building KitsRMXY8628
12
WWW.REVELL.COM
BASIC RACER SET INSTRUCTIONS
Read the entire instruction sheet before beginning assembly. Adult supervision is required!
WARNING:
2
Detail the Body
CHOKING HAZARD — Small parts.
Not for children under 3 years of age.
1 Shape the Body
1. Draw a
design on the
top and sides.
2. Clamp block in a
vise. Cut out shape
with coping saw.
3. Smooth shape
with rasp. Start
with the coarse
section, then the
fine.
1. Remove all
dust. Apply a thin
coat of paint.
When dry scuff
lightly with fine
sandpaper. Repeat
as needed. Do not
scuff the final coat.
2. Apply either dry
transfer or peel
and stick decals.
3. Apply an even
layer of clear coat
with a foam brush.
Apply more layers
as needed.
3 Install the Wheels and Axles
4. Sand the body.
Using coarse
sandpaper first.
Followed with
medium grit paper
and fine grits.
1. Place a wheel
on all four axles.
Press them into
the axle slots.

Summary of content (2 pages)