Installation Guide

13
13.)
Align TRIM RING notch to vent (DAMPER) position. Attach TRIM RING to
FAN. TRIM RING attaches to FAN body and clicks into place when secure.
14.) Select desired LED color temperature by sliding the selector switch on the
back of the SHIELD.
ceiling
TRIM RING
final securing tabs
notch
12.) Press and bend the final securing tabs flat against ceiling to lock the FAN in
place.
final securing tabs
sheetrock
(ceiling)
apply even
pressure to
each side of
securing tab
FAN
daylight (5000K)
bright white (4000K)
warm white (2700K)
SHIELD