How-To Guide

HOW TO OPERATE YOUR REVIBERHOW TO OPERATE YOUR REVIBER
Press the red power switch on the back of the machine
1. POWER: Turns the machine on/o at any time during use.
2. START: Press this buon on the remote to start the machine.
3. SPEED +: Press to increase the speed (not available during auto
programme mode).
4. SPEED –: Press to decrease the speed (not available during auto
programme mode).
NOTE: Speed can be increased or decreased during use
(except in auto programme mode).
5. TIME +: Press to increase the time (not available during auto
programme mode).
6. TIME –: Press to decrease the time (not available during auto
programme mode).
NOTE: Time MUST be adjusted before pressing START on the remote
(except when auto programme mode has been selected)
7. AUTO PROGRAMME MODE: Press to select P1, P2, P3, P4 or P5.
NOTE: Once the auto programme starts you cannot adjust the speed
or time. The auto programmes increase and decrease the speed at set
times (see table overleaf)
8. MANUAL QUICK MODE: Press once to go to speed 30, twice to
speed 60 and three times to speed 99.
9. PAUSE: Press to pause the machine at any time during use.
10. WALK, RUN, SPRINT: Press to jump to speed 30, speed 60 or
speed 99 respectively.