Quick Guide

9
3. Mount the plastic rivets
of self-tapping screws.
4. Screw the locknut to
loosen the universal
joint before attaching
your camera to the wall.
5. Mount your camera onto
the wall and connect all
cables.
6. Rotate the antenna to
the antenna interface
according to clockwise
direction.
Paste installation positioning
stickers on the wall and align
the cross center to the hole in
the wall.
Lead the cables across the hole
on the wall.
1
2
Use a Ø 6-6.5mm drill bit.
Drill 30 mm-depth guide
holes according to the
positions marked by stickers.
1
2
Knock the plastic rivets
into the guide holes and
ensure that they are
tightened up.
Locknut