CW-SR1500-A 15 mm Rod Support Counterweight for SR-1500
Specifications Weight: 4.6 lb. (2 kg) Height: 6.22” (15.8 cm) Width: 3.07” (7.8 cm) Depth: 0.86” (2.2 cm) Warnings • Please read and follow these instructions, and keep this manual in a safe place. • Handle the unit with care. • Keep out of reach of children. • Clean the unit with a soft, dry cloth. • Use only parts provided by the manufacturer. • Make sure the item is intact and that there are no missing parts. • All images are for illustrative purposes only.
Thank you for choosing Revo, and congratulations on your purchase of the Revo CW-SR1500-A Counterweight for the SR-1500 Shoulder Support Rig. The Revo CW-SR1500-A Counterweight is a unique accessory for use with the SR-1500 Shoulder Support Rig, but it can be added to any 15 mm rod support system. It increases stability, relieves arm fatigue, and creates a more balanced system for easier maneuvering and handling of fully-loaded or front-heavy camera setups.
Attaching the Counterweight to the SR-1500 Shoulder Support Rig Note: It is recommended that you attach all accessories to the support rig before mounting the camera. 1 Attach the mounting plate by inserting the two included screws through the mounting plate and into the threaded holes of the counterweight. Tighten them with the included wrench. Important: the screws should turn easily into the holes of the counterweight.
2 Attach the mounting plate and counterweight assembly to the support rig by loosening the black thumbscrew (turning counterclockwise) and sliding the assembly onto the rails at the back of the support rig. 3 Tighten the black thumbscrews (turning clockwise) so that the counterweight is secure and doesn’t slide.
One-Year Limited Warranty This Revo product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
