Safety Instructions

23
GENERAL OPERATION
Setting Alarm
Your radio includes dual alarms. Set Alarm, making sure set time at first.
1. Press ALARM button to select “Alarm 1” or “Alarm 2”, and then press SELECT button to
confirm.
2. Scroll Joystick to select options, and then press SELECT button to confirm the setting.
Alarm time:
00:00 (manually set up the time )
Alarm duration time:
15/30/45/60/90/120 Mins
Alarm source:
DAB, FM or Buzzer
(If the wake-up mode is DAB and the DAB signal strength is
low, the buzzer alarm will be triggered.)
Preset:
Last listened or saved preset station (not available for
Buzzer mode).
Alarm active day:
Daily, Once, Weekends or Weekdays
Alarm volume:
Scroll Joystick to adjust the alarm volume
Alarm states:
On or Off
3. When the display shows “Alarm Saved”, the alarm setting is successful. or will show
on the display.
4. To temporarily switch off alarm, touch SNOOZE area to activate snooze and set snooze
time for 5, 10, 15 or 30 minutes in turn. The unit will go to standby and snooze time will show
on the display.
5. To turn off alarm, press ALARM button when the alarm sounds.
6. To cancel Alarm, refer to steps1-3 to enable alarm “Off”. or will disappear from
display.
Setting Sleep
This feature enables your radio to switch to standby mode by itself after a set sleep time.
1. Press MENU button, and then scroll Joystick to select “Sleep”, press SELECT button to
confirm.
2. Scroll Joystick to select a sleep time, and then press SELECT button to confirm. The sleep icon
will show on the display.
The sleep time options: Sleep Off/15/30/45/60 minutes.
3. To turn the sleep function off while the sleep timer is still counting down, select “Sleep” option,
scroll Joystick to select “Sleep Off”.
 Note: alternatively, press SLEEP button on remote control to set sleep time.