Safety Instructions

3
Operational safety
Loud or unusual noises can also be a sign of a malfunction.
In this case, pull the power adapter out of the socket immediately.
Only touch the power adapter by the housing.
Never pull the power adapter by the cable.
If you are going to be absent for a long period of time or during a thunderstorm, pull the device out
of the socket.
Make sure that contact with moisture, water or splash water is avoided and that no objects filled
with liquids - such as vases - are placed on or near the appliance or power adapter.
If foreign bodies or liquids get into the device or the power adapter, pull the power adapter out of
the socket immediately. Have the device checked by qualified personnel before you use it again.
Otherwise, there is a risk of electric shock.
Make sure that the device or the power adapter is not exposed to dripping or splashing water and
that there are no open sources of fire (e.g. burning candles) near the device or the power adapter.
Connect device
 Please ensure that the power source (socket) is easily accessible.
 Do not kink or squeeze any cable connections.
 Before using the device, check that the voltage information on the device corresponds to the
local mains voltage. The information on the power adapter must correspond to the local power
supply.
 Place the device on a firm, level surface.
 The device consumes power in standby mode. To completely disconnect the device from the
mains, the power adapter must be disconnected.
Protect the device from defects
NOTE!
 Unfavourable environmental conditions such as moisture, excessive heat or lack of ventilation
can damage the device.
 Only use the device in dry rooms.
Avoid the direct vicinity of: Heat sources such as radiators, open flames such as candles,
devices with strong magnetic fields such as speakers.
Do not expose the device to extreme conditions, e.g. direct sunlight, high humidity, moisture,
extremely high or low temperatures, open fire.
 Ensure that there is sufficient distance from other objects so that the device is not covered so
that adequate ventilation is always guaranteed.
 Avoid direct sunlight and locations with an unusually large amount of dust.
 Do not place any heavy objects on the device or the power adapter.
 Do not use the device in potentially explosive areas.
 These include for example fuel storage areas, tank systems, or areas in which solvents are
stored or processed.
 Do not operate the device in areas with air contaminated with particles (e.g. flour or wood
dust).