Instruction manual

16 Channel Digital Video Recorder

Up, Down, Left, Right Arrow Buttons

These buttons are used to navigate through menus and items displayed in the Live Monitoring or Search screens. They

are also used to navigate through menus and GUI during the system setup. You also can use them to change numbers by

highlighting a number in a menu and using the Up and Down arrow buttons to increase or decrease the number’s value.

The arrow buttons are also used to control Pan and Tilt when in the PTZ mode.

When in the PIP display format, pressing the Up and Down arrow buttons moves the position of the small screen

counter-clockwise and clockwise.

Pressing the Left and Right buttons moves through screen pages in the Live Monitoring mode and Search mode.

MENU Button

In the Live Monitoring mode and Search mode, pressing the MENU button displays the menu icons at the top of the

screen. Pressing the button also hides the menu icons. During menu setup, pressing the button closes the current menu

or setup dialog box

Playback Buttons

 Rewind: Pressing the

button plays video backward at high speed. Pressing the button again toggles the playback

speed from

, and .

 Play/Pause: Pressing the

button plays back video at regular speed. The screen displays

when the DVR is in

the Pause mode and the screen displays

when the DVR is playing back video.

 Fast Forward: Pressing the

button plays video forward at high speed. Pressing the button again toggles the

playback speed from

, and .

 Stop: Pressing the button stops playback and enters the Live Monitoring mode.

 Backward: When in the pause mode, pressing the button moves to the previous image.

 Forward: When in the pause mode, pressing the button moves to the next image.

In the Live Monitoring mode, pressing any playback button enters to the Search mode.

PANIC Button

Pressing the PANIC button starts panic recoding of all camera channels, and displays on the screen. Pressing the

button again will stop panic recording.

LAYOUT Button

Pressing the LAYOUT button toggles between different display formats. The available formats are: 4x4, 3x3, 2x2 and

PIP.

ZOOM Button

Pressing the ZOOM button zooms the current image on the screen. A PIP with a rectangle temporarily displays showing

what area of the screen has been enlarged. You can use the arrow buttons to move the rectangle to another area.

PTZ Button

Pressing the PTZ button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to control properly configured cameras.

Enter Button

The

(Enter) button selects a highlighted item or completes an entry that you have made during system setup. This

button is also used to enter the Cameo mode in the Live Monitoring mode or Search mode.