Instruction manual

User’s Manual
26
NOTE: The Alarm Out action cannot be set to System, Boot Up, Restart, Shutdown and Panic Record events.
NOTE: For the Notify action to work, the Mail should be enabled in the NETWORK – Mail setup.
 Beep on Video Loss: Set to sound the DVR’s internal buzzer when video is lost.
DISPLAY SETUP
OSD Settings (DISPLAY  OSD Tab)
 Status/Camera: Check each OSD item box to turn it On
or Off.
Remote Control – The
icon displays when the DVR can be
controlled using the infrared remote control.
Zoom – The
icon displays on the enlarged video.
Network – The
icon displays when the unit is connected to
a network via Ethernet. The icon
displays when audio
communication is available between the DVR and a PC
running REVO Remote Pro
or REVO Remote via Ethernet.
Freeze & Sequence – The
icon displays while in the Freeze
mode, and the
icon displays while in the Sequence mode.
Screen Group – The screen group number displays when the DVR is in other than the 4x4 display mode.
Free Space – The
icon displays when the DVR is in the Recycle mode. The percentage of available storage space displays
when the DVR is not in the Recycle mode.
Date/Time – The current date and time information displays.
User Name – The name of the current user logged in displays.
Camera No. – The camera number displays in the top-left corner of each camera screen.
Camera Title – The camera title displays in the top-left corner of each camera screen.
Record – The record related icons display on each camera screen.
Audio – The icon displays when the DVR can play audio.
PTZ – The
icon displays on each PTZ camera screen with PTZ capabilities.
 Transparency: Adjust the transparency of the setup screens by using the slide bar.
 OSD Margin…: Set the Horizontal and Vertical margins so that text and icons will
display within the edges of the monitor.
Main Monitor Settings (DISPLAY  Main Monitor Tab)
 Sequence – Mode: Select the sequence mode between
Full Sequence and Cameo Sequence. Selecting the
Sequence menu icon at the top of the screen or pressing
the SEQUENCE button on the remote control causes the
DVR to sequence cameras. The DVR can sequence cameras
in two modes: “Full” and “Cameo.” In the Full mode, the
DVR sequences through the cameras with predefined screen
layouts. In the Cameo mode, the bottom right window of
a multi-screen format sequences through the cameras. See
Chapter 3 – Operation, Live Monitoring for details.