Instruction manual

16 Channel Digital Video Recorder

SEARCHING VIDEO

While in the Search mode, pressing the MENU button on the remote control displays the following menu icons at the

top of the screen. Pressing the MENU button again hides the menu icons.

Go To

Bookmark

Export

Camera Menu

Alarm

Panic

Exit

NOTE: The menu icons also can be displayed by moving the mouse pointer to the top of the screen.

Search: Selects video from the event log, searches using a recording table or searches motion events (see below

for more details).

Go To: Displays the first or last recorded image, or searches by date and time (see below for more details).

Bookmark: Adds the current playback point to the bookmark list (see below for more details).

Export: Copies a video segment and saves it (see below for more details).

Camera Menu

 Zoom: Selecting Zoom and choosing the camera number zooms the current playback image of the selected camera

on the screen. Selecting the

(Exit) icon at the top of the screen by pressing the MENU button on the remote control

or moving the mouse pointer to the top of the screen exits the Zoom mode. While in the Zoom mode, the

icon

displays on the camera screen if Zoom is selected in the Display setup screen (OSD tab).

 Audio: Selecting Audio while in the full-screen mode toggles playing recorded audio On and Off. While playing

recorded audio, the

icon displays on the camera screen if Audio is selected in the Display setup screen (OSD tab).

NOTE: The Camera Menu also can be displayed by clicking the right mouse button on each camera screen.

 Edit Group: Selecting Edit Group supports the active cameo function. Select Edit Group and choose

a camera that you want to change the display position (e.g., Camera A). Then, click the right mouse

button to display the menu. If you choose another camera in the menu (e.g., Camera B), the screen

displays Camera B instead of Camera A. Clicking the right mouse button and selecting Exit Group Edit

in the menu exits the Active Cameo mode.

Alarm: Resets the DVR’s outputs including the internal buzzer during an alarm. Selecting the icon is the

same as pressing the ALARM button on the remote control.

Panic: Starts panic recording of all cameras. Selecting again stops panic recording. It is the same as pressing

the PANIC button on the remote control.