Instruction manual

User’s Manual
38
Selecting
located at the bottom displays the Search menu.
 Go To: Displays the first or last recorded image, or searches by date and time (see below for more details).
 Backup: Copies a video segment and saves it (see below for more details).
 Zoom: Zooms the current playback image.
 Slow Play: Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and x1/8).
NOTE: Playing video at low speed will be supported for video recorded 10 images or more per second.
Selecting
located at the bottom displays the Bookmarks screen (see below for more details).
Selecting
in the top-left corner exits the Record Table Search screen.
Motion Search
Motion Search can be selected from the Search menu while
the DVR displays the camera full screen. The Motion Search
screen displays a list of motion events. Use the arrow buttons
to highlight the event for which you would like to see video
and press the button to display the video associated with
the selected event in the small search screen.
Selecting Close and pressing the
button will extract the
video associated with the Motion event and display the first
image of the event. Pressing the (Play/Pause) button on
the remote control button will start playing the “event” video
segment. If you want to return to live monitoring, press the
MENU button on the remote control and select the
(Exit)
icon at the top of the screen.
You also can narrow your event search by selecting Option… and setting up new search conditions.
 From: Pressing the
button toggles between On and Off. When
set to Off, you can enter a specific Date and Time. When set to On,
the search will be from the first recorded image. When highlighting
and pressing the button the bookmark list displays and the
bookmark point you selected will be the starting date and time.
 To: Pressing the
button to toggles between On and Off. When set to Off, you can enter a specific Date and Time.
When set to On, the search will be to the last recorded image. When highlighting
and pressing the button the
bookmark list displays and the bookmark point you selected will be the ending date and time.
 Type: Motion Search detects motion in the defined area.
 Zone: Press the
button, and an image from the video appears with a grid overlay. You can turn sensor blocks
On and Off to define the area of the picture in which you want to search for motion. The zone should be placed or
focused on the centre or, at least, within the outline of targeted object.
NOTE: Defining the area of the image in which you want to search for motion is nearly identical to setting up
the DVR for Motion Detection. Please refer to the Motion Event Settings section in Chapter 2 — Installation &
Configuration – Advanced Setup, Event Setup for more detailed instructions on setting up the detection blocks.
 Sensitivity: Select the sensitivity from 1 (low sensitivity) to 5 (high sensitivity).
 Min. Blocks: Set the number of sensor blocks that must be activated.
Once you set your desired search conditions, select Search and press the
button to display the search results in the
Motion Search screen. Selecting Cancel exits the screen without saving the changes.
When you search for motion events for another camera, you will be asked whether or not you want to delete the previous
search results from the list.