Instruction manual

16 Channel Digital Video Recorder

⑪ Click the icon to set up the image drawing mode and OSD. You can adjust the display speed by changing the

image drawing mode, and select OSD.

⑫ The event status window at the bottom displays a list of events that were detected at the remote site.

⑬ Selecting a camera on the screen and clicking the right mouse button displays the text menu screen.

 Change Camera Title: Changes the camera name.

 Enable Audio: Enables audio communication with the remote site. When the audio control panel

displays, click the

icon to send audio to the connected remote site and click the button again to

stop sending audio. Click the

icon to monitor live audio from the connected remote site through

the attached speaker and click the button again stop monitoring live audio. Clicking both the

and

buttons allows two-way communication. Clicking the button disables audio communication.

 Aspect Ratio: Changes the image aspect ratio.

 Deinterlacing: Using a deinterlace filter for interlaced video enhances image display quality by eliminating horizontal

scan lines and noise in areas with motion.

 Anti-Aliasing Screen: Enhances image display quality by eliminating stair stepping (aliasing) effects in the enlarged image.

NOTE: A camera name change in the Web Watch mode does not affect the camera name set up on the remote

site. Leaving the Camera Title blank causes the camera name set up on the remote site to display.

NOTE: The icon will display on each camera screen when audio communication is available between the

REVO Remote system and a DVR.

WEB SEARCH

Remote Search is a remote web search program that allows you to search recorded video on the remote DVR.

NOTE: The remote site connection in the Web Search mode will automatically be disconnected if there is no

activity for 30 minutes.

① Click the

icon to log out of the REVO Remote program.

② Click the

icon to access the web monitoring mode.

③ Position the mouse pointer on the Remote Search logo to see the version of the REVO Remote program.

④ The DVR information window displays the time information of recorded data on the remote DVR and login information

of REVO Remote.