User Manual

2. Select the angle and speed setting on the remote control. The
LEDs will indicate your selections on the panoramic head.
3. Select the panning direction on the remote control. The
angle and speed LEDs will blink to indicate that the
rotator is moving.
To discontinue operation, press the stop button on the
remote.
Using Bluetooth
The panoramic head is Bluetooth compatible. To trigger your
smartphone camera via the remote control, follow these steps:
1. Turn on the panoramic head. The power LED will flash to
indicate that it is searching for a Bluetooth device.
2. Open the Bluetooth preferences on your phone, and
select REVO EPH-6 in the device list. Wait until the
phone indicates that Bluetooth is connected.
3. Open the camera app on your smartphone.
4. Point the remote control at the panoramic head, and
press the shutter button. This will trigger the phone’s
camera.
Charging the Panoramic Head
When the battery is low, the blue power indicator will flash
quickly.
1. Plug the Micro-B USB connector into the USB port of the
Panoramic head.
2. Plug the Standard-A USB connector into a powered USB
port on a computer or into a USB wall charger. The
power indicator will glow red. When it’s fully charged, the
indicator will turn off.