Safety Instructions

15
GETTING STARTED
Positioning your Radio
Place your radio on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
◼ Where the unit will be exposed to direct sunlight.
◼ Where the unit will be close to heat radiating sources.
◼ Where the humidity is high and ventilation is poor.
◼ Where it is dusty.
◼ Where it is damp or there is a possibility of water dripping or splashing onto unit.
Adjusting the Antenna
Fully extend antenna to ensure you receive the best reception possible in both DAB and FM radio
modes. It may be necessary to adjust the position of the radio and/or antenna to achieve the best
signal.
Power Supply
Your radio is supplied with a multi-region power supply, meaning that it can be
operated in a number of countries around the world.
Simply choose the correct adaptor for your country
from the selection supplied, and then dock it onto
USA plug of power adapter.
Turning the Unit On/Off
Connect the plug at the end of power adapter cable to the DC IN socket on the rear of unit. Then
insert the power adapter into the mains socket. For initial use the unit will switch on.
Press button to switch unit standby.
To turn off unit completely, unplug the power adapter from the mains socket.
Automatically Setting the Clock
The clock can be set and updated automatically if are connected to the internet or receive
DAB/FM signals in your location. In order for the clock to synchronise to the current local time you
must leave it on an Internet Radio, DAB or FM station for a short period of time. You can also
choose how you would like to keep the clock up to date the Internet, DAB or FM radio signals. Go
to Main menu - System settings - Time/Date - Auto update.