Operation Manual

To Change the Display Mode
Pico™ has seven different display modes.
Press the INFO/SCAN button to cycle
through each mode.
These display modes are explained in the
table below:
BBC Radio 1
Sig strength 96
Signal error 98
Normal display
with scrolling text
Display option Example
Type of broadcast
Broadcaster
Time and date
Station name and
frequency
Data rate and
stereo/mono
Signal strength
To Show the Signal Strength
Press the scroll wheel.
The display shows a signal bar with the
strength of the current station:
The indicator on the signal bar shows the
minimum acceptable signal level.
Stations with a signal strength below this
level will not provide a steady stream of
audio.
Finding and Adding New
Stations
As time passes, new stations will become
available in your area. To add them to
your station list simply press and hold the
SCAN button for at least two seconds.
Removing ‘Unavailable’
Stations
To remove ‘unavailable’ stations from Pico’s
station list, ie. those that display a ?
before the station name, see the ‘Menu
Options’ section on page 8.
Strength of signal
Minimum signal level
English
7