Operation Manual

14
English
Alarm Settings
PiXiS IR is equipped with two programmable
alarm clocks. From the Home Screen, press
“Alarms” then press “Alarm settings”.
To edit or review an alarm, press either
“Alarm 1” or “Alarm 2”. A summary screen
displaying the current alarm selections will be
displayed. There are fi ve adjustable settings:
• Alarm Enable / Frequency selection
• Time
• Mode
• Volume (0 – 16)
Simply press any setting to review or
edit it. Pressing the Back button will
save your changes and take you back
to the main summary screen.
If you select “Once”, in addition to setting the
alarm time, you will also need to set a specifi c
date. The date setting screen behaves in the
same manner as the time setting screen.
Press “Time” to adjust the time of alarm
activation. Using the up and down arrows
above the hours and minutes, set the specifi c
time that you wish the alarm to sound.
Alarms can be set to activate Daily,
Once, Weekends or on Weekdays.
Alarms can be set to wake you with
audio from any one of the following
modes: Internet or Buzzer.
If Internet Radio is chosen for the
alarm source, you will also be awoken
to the last listened station.
Pressing “Volume” will display the
“Select Alarm Volume” screen, where
you can predefi ne the volume level that
you wish your alarm to activate at.
When either alarm is activated, mini
icon(s) as picture below will appear in
the top section of your radio’s screen.
Alarms in Standby Mode
When PiXiS is in standby mode, if an alarm is
set an alarm icon will be displayed on screen.
In the bottom right hand corner of
this screen, a shortcut button is also
provided which returns you to the main
alarm summary screen at any time.
Alarm 1
Alarm 2
Alarm settings
Off
Off
16.20pm 31 Jul 2012
Set alarm frequency
Daily
Once
Weekend
OFF
16.20pm 31 Jul 2012
:
5606
Set alarm time
16.20pm 31 Jul 2012
Select Alarm Source
Buzzer
Internet Radio
16.20pm 31 Jul 2012
Alarm 1 settings
Time 06.56
Mode Internet Radio
Volume 10
Enable Off
16.20pm 31 Jul 2012