Operation Manual

15
English
PiXiS IR has a USB software upgrade facility.
You can connect the radio to your PC via its
USB socket, located on the units back panel.
If a new software revision becomes
available, it will be downloadable from
www.revo.co.uk, where explicit instructions
on how the upgrade should be executed
will also be provided. Connecting PiXiS
IR to your PC without following these
instructions is not advised and could
permanently damage your radio.
USB Update Port
USB Update Port
If Sleep mode is activated, a
crescent moon icon will show
in the top part of the screen.
15:27
15:27
When an alarm goes off, you’ll get the
option to either “Snooze” or “Cancel”.
“Snooze” puts PiXiS IR back into
standby mode for a specifi ed period
before repeating the alarm.
The snooze interval duration can be
set in the Alarms Menu, simply press
the Alarms Icon then press “Alarm
Snooze”. The Snooze interval can be
set from between 1 to 30 minutes.
“Cancel” switches the alarm system off
while allowing you to continue listening.
To switch the alarm off and also
stop audio playback, press the
standby button on PiXiS IR.
Alarm Snooze
PiXiS IR has a handy sleep function which
automatically switches PiXiS IR into standby
mode after a specifi ed time period.
Simply press the “Sleep” icon on the
Homepage. The default setting is “Off”,
but by pressing the “+” icon, you can cycle
through the options to send PiXiS IR to
standby in 15, 30, 45 or 60 Minutes.
Sleep Function
Snooze Cancel
Snooze Cancel
Sleep Time
30 Minutes
+
+
–
–
Tuesday 31 July
Tuesday 31 July