Operation Manual

16
English
The System settings menu is accessible
from PiXiS IR’s main menu screen.
The following options are available,
allowing you to manually view and
change PiXiS IR’s settings:
• Time
• Equaliser
• Network
• Miscellaneous
System Settings
By default, PiXiS IR will automatically set its
time and date when you connected to the
internet, so you may not ever need to worry
about manually setting it. However, if you do
need to set or change it yourself, the Time
Settings menu includes the following options:
• Time Zone
• Use Daylight Saving
• Time Source
• Manual Setup
• Time Format
Time & Date Settings
Alarm Settings
This is an alternative route to access
your PiXiS IR’s alarm clock settings,
as you would via the main “Alarms”
mode. See page 14 for details.
Time Zone
This setting simply offers you a list of
global timezones to choose from. The
current setting is highlighted in yellow.
Use Daylight Savings
A simple toggle button. Touch to select
Yes / No to turn daylight saving on or off.
Time Source
Allows you to specify where PiXiS IR
should sync its clock from. By default this
is set to fetch the time from the internet.
You can also set the time sync source
to “None”, if you wish to set it yourself
and don’t wish any external updates.
Manual Setup
Allows you to easily set the time and
date yourself. Use the Up / Down
buttons as illustrated. Clicking the Back
button will save your changes and
take you to the previous screen.
Time Format
A simple toggle to select either
12 or 24 hour clock.
Time Zone
Use Daylight Savings
Time Source
Manual Setup
0 hrs (UTC)
No
Internet
Settings
Time Settings
Settings
:
2915
Set time
16.20pm 31 Jul 2012
16.20pm 31 Jul 2012
Settings Menu
Equaliser Settings
Network Settings
Miscellaneous Settings
Time Settings
16.20pm 31 Jul 2012