Manualshelf

Use and Care Manual

ManualsBrandsRevo ManualsElectrical16-Channel 2TB 960H DVR Surveillance System with (8) 700 TVL 100 ft. Night Vision Cameras
11121314151617181920
User’s Manual
12
Use the arrow keys to highlight the character you want in the name or title and press
the
button. That character appears in the title bar and the cursor moves to the next
position. Pressing
toggles between the upper and lower case keyboards,
backspaces, and
deletes entered characters. Pressing toggles between different
keyboard layouts. You can use up to 31 characters including spaces in your title.
Special characters can be created using ^ and a capital letter; e.g., ^J for NL (New
Line), ^M for CR (Carriage Return). Special characters are commonly used by text
input devices and will be useful when performing Text-In Searches.
System Setup
General
Figure 8: System – General setup screen.
Highlight the Site box and press the
button. A virtual keyboard appears that you can use to enter a Site Name.
Once you have entered your title, highlight OK and press the
button.
Highlight the box beside System ID and press the button. Change the number by highlighting it and using the Up
and Down arrow buttons to increase and decrease the number from 0 to 99.
NOTE: The System ID number is used to identify the unit when it is connected with other DVRs through the
RS485 port. You cannot use the same ID number for two or more DVRs that are in the same RS485
network. It is possible to have multiple DVRs with System ID 0 that are in the same area as long as
they are not part of an RS485 network. If this is the case, all will be controlled at the same time when
using the infrared remote control.
Highlight the box beside Language and press
button. A drop-down menu displays the available languages.
Highlight the desired language and press the button.
The box beside Version displays the software version of the DVR. To upgrade the software, connect a USB device
containing the upgrade package file to the DVR. Highlight Upgrade… and press the
button. The Upgrade
screen appears. The screen displays the upgrade package file names that are available. The “.rui” indicates that the
file is for software upgrades.