Use and Care Manual

Digital Video Recorder

Select the desired file and press the

button. Highlighting the Install button and pressing the button will install

the selected software package. Highlighting the Cancel button and pressing the

button will close the window

without upgrading the software. If the upgrade package file is not installed on the DVR properly, you will get an

error message. The system restarts automatically after completing the upgrade.

CAUTION: The USB device must be FAT16 or FAT32 format.

You can import saved DVR settings or export the current DVR settings. To import saved DVR settings, connect the

USB device containing the setup file (.dat) to the DVR. Highlight Setup – Import… and press the

button. Select

the desired setup file and press the Import button to import the selected settings and change the DVR settings accordingly.

To export the current DVR settings, connect the USB device to the DVR. Highlight Setup – Export… and press the

button. Highlight the box beside File name and press the button. A virtual keyboard allows you to enter the

file name. Selecting Export will save the current settings in .dat file format on the USB device.

NOTE: Even after changing the DVR settings by importing saved settings, the time-related settings

(Date/Time, Time Zone and Daylight Saving Time) will NOT be changed.

CAUTION: The USB device must be FAT16 or FAT32 format.

Highlight Show System Log… and press the button to display the System Log.

The System Log screen lists system activities (up to 5,000 from the latest) that have occurred along with the time and

date. The

icon will be displayed in the last column for system activities of the remote site. You can scroll through

the log pages by using the Up and Down arrows, or you can go directly to a log page by entering the log page number

in the box at the bottom left of the screen. Highlight Close and press the

button to exit the screen.

To export the system log information, connect the USB device to the DVR. Highlight Export… and press the

button. Highlight the box beside File name and press the

button. A virtual keyboard allows you to enter the file

name. Selecting Export will save the log information in .txt file format on the USB device.