Use and Care Manual

Digital Video Recorder
25
To add a User, highlight the + User… box and press the
button.
A virtual keyboard appears allowing you to enter the User Name.
Enter the name and assign the User to a Group and password. You
can use camera buttons 1 to 9 on the remote control to assign the
password. The password can be up to 8 digits. You will be asked to
confirm the password.
NOTE: In addition to using the infrared remote control, you can use the virtual keyboard to assign the
password. To display the virtual keyboard click the
button using the mouse.
Highlighting the box beside Auto Login allows you to select a User to be automatically logged in when the DVR is
powered up. It can also be set to never automatically login a user.
Highlighting the box beside Auto Logout allows you to select from a list of times that the user will be automatically
logged out. The options are: Never, 1 min., 3 min., 5 min., 10 min., 15 min., 20 min., 30 min. and 1 hr.
Storage
Figure 11: System – Storage setup screen.
The information in the Type column describes the storage device.
The capacity of the storage device is displayed in the Capacity column.
The Format column displays whether the device is used for recording (Record) or not (Not Using). Not formatted
indicates the device is not formatted.
Highlight the box in the Format column for the desired storage device and press the
button. You will be able to format the device for recording. When selecting Not Using
from Use As and highlighting the Format button, the device will not be used for recording.
The Information column displays whether the device is being used or not. Other indicates the device has been used
for another DVR.
Highlight the box in the Information column for the desired storage device and press the
button.