Use and Care Manual

User’s Manual

Highlight the slide bar beside Auto Deletion, and use the Left and Right arrow buttons or Up and Down arrow

buttons to adjust the length of time recorded data will be kept from 1 to 999 days. The DVR automatically deletes

video recorded earlier than the user-defined period under three conditions: at midnight, whenever the system reboots

or whenever the user changes the Auto Deletion settings. Selecting Never will disable the Auto Deletion function.

Highlighting Use Panic Recording and pressing the button toggles between On and Off.

Highlight the Panic Recording – Duration box and set the duration of panic recording. Panic recording will stop

automatically after the preset duration as long as the PANIC button is not pressed to stop the panic recording. You

can set the dwell from 5 minutes to 1 hour. Select No Limit if you want to stop panic recording manually.

Highlighting the Panic Recording – ips and pressing the button allows you to set the images per second for

Panic recording. You can select from 1.00 to 30.00 ips (25.00 ips PAL).

Highlighting the Panic Recording – Quality and pressing the button allows you to set the recorded image quality

for Panic recording. You can select from: Very High, High, Standard and Basic.

Highlighting the Panic Recording – Resolution and pressing the button allows you to set the recorded image

resolution for Panic recording. You can select from: Very High (D1), High (Half D1) and Standard (CIF).

Schedule

< Simple Mode >

< Advanced Mode >

Figure 14: Record – Schedule setup screen.

You can program the DVR to record only during certain times based on time, day of the week, and holidays. The

smallest time segment you can use is 15 minutes.

Highlighting Schedule On and pressing the button toggles between On and Off. In the Schedule On mode, the

DVR records video based on the schedule established in the Schedule screen. When turning Schedule recording Off,

you will be asked to confirm your decision, and

displays at the top-left corner of each camera screen. Panic

recording will function even when Schedule is turned off.

displays during panic recording.

Highlight the Schedule Mode box and press the button. You can select between Simple Mode and Advanced

Mode. Selecting Advanced Mode allows you to set up individual recording schedule for each event.

NOTE: Changing the schedule mode will reset all event and action statuses.

Highlight the + and press the

button to add a schedule item.

Highlight the box under the Day heading and press the

button to change the days that the scheduled recording will

take place. Choose from: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.

Highlight the box under the Range heading and press the

button to change the time range that the scheduled

recording will take place. The smallest time segment you can use is 15 minutes.

Highlight the box under the Mode heading and press the

button to change the recording mode that will be used.

Choose from: No Record, Time, Event and Time & Event. (Simple Mode Only)