Use and Care Manual

User’s Manual
44
NOTE: Selecting Use Mobile sets the REVO Remote service to be enabled automatically regardless of your
REVO Remote settings.
When using NAT (Network Address Translation) or firewall services, opening all UDP ports allows you
to access a DVR using Blackberry and Android devices.
You can access a remote DVR and monitor live video images using media players, such as VLC
Player, supporting RTSP service. Start the media player on your local PC and enter
“rtsp://ID:Password@IP address:RTSP port number/trackID=‘channel number’”, or start Internet Explorer
on your Blackberry or other mobile devices and enter “http://IP address:REVO Remote port number/”.
Some media players might play video properly depending on network conditions.
RTSP service might not be supported, depending on the type of media player.
REVO Remote
Figure 29: Network – REVO Remote setup screen.
Highlight Use REVO Remote Service and press the button to toggle between On and Off. See Appendix –
REVO Remote for detailed descriptions of the REVO Remote service.
Highlight the box beside Port and press the button. Set the port number used when accessing REVO Remote by
using the Up and Down arrow buttons to increase or decrease the numbers.