Use and Care Manual

Digital Video Recorder
45
Notification Setup
Callback
Figure 30: Notification – Callback setup screen.
The DVR can be set up to contact a computer running REVO Remote Pro (Remote Administration System) when an
event occurs. Highlight the box under the No. heading and press the
button to toggle between On and Off. You
will only be able to change the IP addresses if No. is enabled.
Highlight the IP Address box that you want to change and press the button. Use the arrow buttons to enter the IP
address of the computer you want contacted during an event. You can enter up to five IP addresses.
Highlight the box beside Retry and enter the number of times you would like the DVR to try contacting the computer.
You can select from 1 to 10 retries.
Push
Figure 31: Notification – Push setup screen.