Use and Care Manual

User’s Manual

Highlight Enable and press the

button to toggle between On and Off. When it is On, you can set up the push server.

Highlight the box beside Ignoring Time and press the button. A list of intervals ranging from 30 seconds to 5

minutes appears. The DVR will not send callback messages during the preset interval range.

Mail

Figure 32: Notification – Mail setup screen.

The DVR can be set up to send an email when an event occurs. The Mail Group and Recipient can be turned On or

Off by highlighting the boxes beside the individual mail group and recipient accounts and pressing the button.

Highlighting the box beside “Group & Recipient” and pressing the

button will toggle between all mail accounts

being turned On and Off.

The +/– column is used to collapse and expand recipient groups. If there is a + or – in this column, it indicates the

item is a Group Name. If there is a – in front of the Group Name, it indicates that the group has been “expanded” and

all of the Recipient Names within that group are displayed below the Group Name. If there is a + in front of the

Group Name, it indicates that the group has been “collapsed” and all of the Recipient Names within that group are

hidden. To collapse or expand a group, highlight the +/– column in front of the desired group and press the

button.

The column can be used to delete a Recipient Name or an entire Group. If the is grayed out, that Group or

Recipient cannot be deleted. Highlight the

and press the

button. You will be asked to confirm that you want to

delete the Recipient or Group.

Highlight the + Group and press the button to add a recipient Group and select the image file format attached to

an email.

Highlight the box beside Group and press the button. A virtual

keyboard appears allowing you to enter the Group name.

Highlight the box beside Attach Type and press the button.

You can select between CBF and JPG. When selecting CBF, the

DVR will attach an event detected video clip to an email. When

selecting JPG, the DVR will attach the event detected image file

(JPEG format) to an email.

Highlight the + Mail and press the button to add a mail Recipient.