Use and Care Manual

Digital Video Recorder

Highlight Use and press the

button to toggle

between On and Off. Assign the Recipient to a

Group and enter the Recipient’s Display Name.

Highlight the box beside Address and enter the

recipient’s e-mail address and mail server provider.

Highlighting

allows you to select the mail

server provider from a list of registered SMTP

mail server providers.

Highlight the box under the Attach Type heading and press the

button to change the image file format attached to

an email.

NOTE: Attaching a image file to an email will not be available for the Text-In event.

Highlight SMTP Setup… and press the

button. The SMTP Setup screen appears.

Highlight the box beside SMTP Server and press the

button. A virtual keyboard appears that you can use to enter

the IP address or domain name of the SMTP server.

Highlighting

allows you to select your SMTP server from

a list of registered SMTP servers.

NOTE: You will need to get the IP Address or domain name of the SMTP Server from your network

administrator.

You can use the domain name instead of IP address if you already set up the DNS Server when setting

up the LAN.

Highlight the box beside Port and press the button. Use the arrow buttons to enter the SMTP Server port number

obtained from your system administrator. The default port number is 25.

Highlight Use SSL/TLS and press the button to toggle between On and Off. When it is On, the DVR can send an

email via an SMTP server requiring SSL (Secure Sockets Layer) authentication.

NOTE: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit

(http://www.openssl.org/).

Highlight the box beside Authentication and press the button.

An Authentication screen appears. Highlight Use and press the

button to toggle between On and Off. Highlight the box beside

User/Password and press the button. A virtual keyboard

appears allowing you to enter the user ID and password.

Highlight the box beside Sender and enter the sender’s e-mail address. Use the virtual keyboard to enter the e-mail

address.

Highlight the box beside Display Name and enter

the Sender’s Display Name. Highlight the box

beside Address and enter the sender’s e-mail

address and mail server provider. Highlighting

allows you to select the mail server provider from a

list of registered mail server providers.

Highlight the Test box and press the button to test emailing with the current settings you made.