Use and Care Manual

User’s Manual

Zoom Mode

You can enlarge an area of the video by pressing the

ZOOM button. For a few seconds after pressing the ZOOM

button, a rectangle displays on the screen. A rectangle shows the area that will be enlarged. You can move the

rectangle around using the arrow buttons. Pressing the

button in the Zoom mode enlarges the area in rectangle.

Exit the Zoom mode by pressing the

ZOOM button. While in the Zoom mode, the icon displays if Zoom is

selected in the Display setup screen (OSD tab).

PTZ Mode

If a user who has PTZ Control authority logs into the system, the user can control PTZ cameras. The DVR will

control cameras with Pan, Tilt and Zoom capabilities. Press the

PTZ button to display the PTZ camera menu and

enter the PTZ mode, and press the button again to exit the PTZ mode.

Select the PTZ camera you wish to control by selecting it from the menu. The icon

displays on the PTZ camera screen.

To use the remote control buttons, press the Left and Right arrow buttons to pan left and right.

Press the Up and Down arrow buttons to tilt the camera up and down. Press the

ZOOM +

button

to zoom in, and press the ZOOM –

button to zoom out. You can use the

FOCUS and

FOCUS buttons to focus the image.

Figure 38: PTZ Select Camera menu.

You can save camera position settings as “presets” so that you can go

directly to desired views.

Once you have the camera at the desired settings, press the PRESET SET

button, and the Set Preset dialog box will appear. Select the number you

want to assign to the preset and press the

button. Use the virtual keyboard

to enter the preset name.

Press the PRESET SELECT button to load the PTZ preset and the Move to

Preset dialog box will appear. Select the desired preset and press the

button to load the preset.

< Set Preset >

< Move to Preset >

Figure 39: PTZ Preset menu.