Use and Care Manual

User’s Manual
62
Move the cursor over the date and time and press the button. You can use
the Left and Right arrow buttons to highlight the year, month, day, hours,
minutes and seconds. Use the Up and Down arrow buttons to change to the date
and time you want to search for video.
Once you have set the date and time you want, press the button. Then highlight Go and press the button. The
selected date and time will display. (If no video was recorded during the selected time, a message appears alerting
you that no image was recorded at that time.) The
button and arrow buttons can now be used to review the
surrounding video.
Bookmark
Selecting
(Bookmark) in the Search menu adds the current playback point to the bookmark list. See the following
Bookmarks section for details.
Display
 Full Screen: Selecting
(Display) →
(Full Screen) and choosing the camera number button displays the
selected camera full screen. It is the same as pressing the individual camera buttons on the remote control or
clicking the left mouse button on a camera image when in one of the multiview formats (i.e., 2x2, 1+5, 1+7, 3x3 or
4x4). Clicking the left mouse button on the screen again returns to the previous display mode.
 2x2, 1+5, 1+7, 3x3, 4x4: Selecting
(Display) →
, , , or (2x2, 1+5, 1+7, 3x3 or 4x4) displays
the cameras in the selected multiview screen mode (2x2, 1+5, 1+7, 3x3 or 4x4). Selecting each display mode is
the same as pressing the
LAYOUT button or scrolling the mouse wheel up and down when in one of the multiview
formats (i.e., 2x2, 1+5, 1+7, 3x3 or 4x4).
 Camera OSD, Status OSD: Selecting
(Display) → Camera OSD or Status OSD toggles Camera OSD
or Status OSD On and Off.
Previous Group, Next Group
Selecting
or (Previous Group or Next Group) in the Search menu moves to the previous or next page. It is the
same as pressing the Left or Right buttons on the remote control.
Alarm
Selecting
(Alarm) in the Search menu resets the DVR’s outputs including the internal buzzer during an alarm. It
is the same as pressing the ALARM button.
Panic
Selecting (Panic) in the Search menu starts panic recording of all cameras, and selecting again stops panic
recording. It is the same as pressing the PANIC button.
Camera Menu
 Zoom: Selecting
(Camera Menu) → Zoom and choosing the camera number zooms the current playback
image of the selected camera on the screen. It is the same as pressing the
ZOOM button. Selecting Zoom again
exits the Zoom mode.
 Audio: Selecting
(Camera Menu) → Audio toggles audio playback On and Off. Recorded audio will be
played when the DVR displays a camera with recorded audio in full screen mode.
 Show/Hide Text-In: Selecting
(Camera Menu) → Show Text-In or Hide Text-In shows or hides the
text-in data on the screen if the video was recorded with text-in data.
 Edit Group: Selecting (Camera Menu) → Edit Group enters to the Active Cameo mode. It is the same as
pressing the
button in any multiview formats. Refer to the previous Live Monitoring – Active Cameo Mode
section for details.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on the screen while in the
search mode.