Use and Care Manual

Digital Video Recorder

You can search video from the first to last recorded images, or you can set the start and stop times and dates.

Highlight the box beside From and press the

button to toggle between On and Off. When set to Off, you can enter

a specific Date and Time. When set to On, the search will be from the first recorded image. When highlighting

and pressing the

button the bookmark list displays and the bookmark point you selected will be the starting date

and time.

Highlight the box beside To and press the

button to toggle between On and Off. When set to Off, you can enter a

specific Date and Time. When set to On, the search will be from the last recorded image. When highlighting

and

pressing the

button the bookmark list displays and the bookmark point you selected will be the ending date and time.

Highlight the box beside Type and press the

button. You can select between Motion Search and Museum Search.

Motion Search detects motion in the defined area. Museum Search detects if a defined object has moved.

Highlight the box beside Zone and press the

button. An image from the video appears with a grid overlaid. You

can turn sensor blocks On and Off to define the area of the picture in which you want to search for motion.

NOTE: Defining the area of the image in which you want to search for motion is nearly identical to setting up

the DVR for Motion. Please refer to Motion Screen in Chapter 3 — Configuration for more detailed

instructions on setting up the detection blocks.

When setting the Museum Search Zone, the zone should be placed inside of the border line of the

target object. If the selected block is placed on the border line, the sensitivity of the Museum Search

may decrease.

The zone should be placed or focused on the centre or, at least, within the outline of targeted object.

Highlight the box beside Sensitivity and press the

button. You will be able to select from 1 (low sensitivity) to 5

(high sensitivity).

Highlight the box beside Min. Blocks and press the

button. You will be able to set the number of sensor blocks

that must be activated.

Once you set your desired search conditions, highlight Search and press the

button to display the search results in

the Motion Search screen. Selecting Cancel exits the screen without saving the changes.

When you search for motion events of another camera, you will be asked whether or not you want to delete the

previous search results from the list.