Instruction Manual

This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow to point to
'LENS' by using the UP and DOWN buttons.
2. Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button.
LENS (Selection)
1. LENS DC
2. EXPOSURE
3. WHITE BAL AWB
4. DAY NIGHT AUTO
5. 3DNR ON
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
►
LENS
BRIGHTNESS IIIIIIIIIIIIIIIIII 50
RETURN RET
►
Note The brightness of the screen can be adjusted in DC mode.
The brightness can be adjusted within the range of 0 ~ 100.
The optimum level of brightness for the user can be achieved by adjustment.
EXPOSURE
1. LENS DC
2. EXPOSURE
3. WHITE BAL AWB
4. DAY NIGHT AUTO
5. 3DNR ON
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
►
EXPOSURE
SHUTTER 1/60
BRIGHTNESS IIIIIIIIIIIIIIIIII 50
AGC HIGH
SENSE-UP AUTO
BLC BLC
D-WDR OFF
RETURN RET
►
The EXPOSURE menu is used to set the automatic light control method for this camera.
(Xtended Dynamic Range)
1) SHUTTER Select the shutter mode.(1/60(50), FLK~ 1/100,000 sec, x2 ~ x256)
Can be changed while in shutter mode.
2) BRIGHTNESS Adjust BRIGHTNESS level (0 ~ 100)
Can be adjusted while in manual lens mode.
3) AGC Auto gain control (OFF / LOW / MIDDLE / HIGH)
4) SENSE-UP Use under very low light condition for full color surveillance.
Select maximum Low-Shutter value. (x2 ~ x256)
5) BLC Sharpens subjects with backlight.(OFF / BLC / HBLC)
6) D-WDR Digital Wide dynamic range
OFF / INDOOR / OUTDOOR
6
BLC
GAIN MIDDLE
DEFAULT
LEFT/RIGHT IIIIIIIIIIIIIIIIII 2
WIDTH IIIIIIIIIIIIIIIIII 4
TOP/BOTTOM IIIIIIIIIIIIIIIIII 3
HEIGHT IIIIIIIIIIIIIIIIII 3
RETURN RET
►
<BLC MODE>