Instruction Manual
8
1) CAM TITLE
2) D-EFFECT
FREEZE Select the real or still mode.
MIRROR Reverse the screen in 3 modes selection.
(OFF / MIRROR / V FLIP / ROTATION)
D-ZOOM D-Zoom (x2~x32) / Adjust PAN / TITL
GAMMA Adjust the luminance (0.05~1.00)
NEGA / POSI Select the negative or positive mode.
3) MOTION
AREA SELECT Select MD area number.
AREA DISPLAY Select MD ON/OFF
LEFT/RIGHT Adjust the location of the MD area with boundary LEFT and
RIGHT.
WIDTH Adjust width of MD area
TOP/BOTTOM Adjust the location of the MD area with boundary TOP
and BOTTOM
HEIGHT Adjust height of MD area
SENSITIVITY Adjust sensitivity of MD area.(0~40)
MOTION VIEW The screen displays with green dots. When a motion is detected
in the selected area, the green dots are displayed on the screen.
A. CAM TITLE
B. Character Table
C. Command Line
← : Move to left
→ : Move to right
CLR : Erase all characters
POS : Move the position of title
END : Save and End
SPECIAL
1. LENS DC
2. EXPOSURE
3. WHITE BAL AWB
4. DAY NIGHT AUTO
5. 3DNR ON
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
►
3DNR
LEVEL IIIIIIIIIIIIIIIIII 50
RETURN RET
►
1. LENS DC
2. EXPOSURE
3. WHITE BAL AWB
4. DAY NIGHT AUTO
5. 3DNR ON
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
►
SPECIAL
1.CAM TITLE ON
2.D-EFFECT
3.MOTION ON
4.PRIVACY OFF
5. SYNC INT
6.LANGUAGE ENGLISH
7.RETURN RET
►
MOTION
AREA SELECT AREA1
AREA DISPLAY ON
LEFT/RIGHT IIIIIIIIIIIIIIIIII 8
WIDTH IIIIIIIIIIIIIIIIII 32
TOP/BOTTOM IIIIIIIIIIIIIIIIII 4
HEIGHT IIIIIIIIIIIIIIIIII 24
SENSITIVITY IIIIIIIIIIIIIIIIII 40
MOTION VIEW OFF
►
A
B
C
CAM TITLE
012345 6789
ABCDEF GH IJK
LMNOPQ RSTUV
WXYZ ►→← ↑↓ ()
‾–_ ▌/ = & : ~ ‚ "
←→ CLR POS END