Use and Care Manual

INSTALLATION and CONNECTION
LENS FOCUS ADJUSTMENT
Installing the camera
1. Affix station Bracket on the wall or any place where you want.
2. With the supplied tapping screws, you can fix the bracket.
3. Adjust the camera lens to face the area to be monitored and fix it with the butterfly shape handle on the bracket.
* You can adjust the angle of this camera to move it as follows.
The lens is focused far from 1m when ex-factory. Therefore we recommend the lens focus as is.
Connection
(3 AXIS AVAILABLE)
* Opening the front cap is not
allowed to prevent moisture
invading inside.
ROTATION
PANNING
TILTING
CAMERA IN VIDEO-OUT
DVR
MONITOR
Connect the RJ12 cable of the camera to the RJ12 socket on the back of the DVR.
After positioning your monitor, connect the monitor to the DVR through the video-out
BNC Terminial on the back panel of the DVR.
If you need to extend the cable length, you can use an RJ12 extension coupler & a desired
RJ12 extension cable.