User Manual

Pairing the Transmitter and Receiver
1. Turn on the transmitter’s power.
2. Hold the record button on the transmitter
until the indicator light blinks red and
green.
3. Turn on the receiver’s power. The receiver’s
indicator light will blink green when the
pairing is successfully completed.
4. Release the transmitter’s record button.
Activity Indicator Status
Indicator Light Status
(steady) Standby and ready.
(blinking) A button has been
pressed and is active.
(steady) Connection issue.
Check that all wires are
connected to the device
and your camera.
(steady) Video is recording or the
shutter is locked.
(blinking) Low battery.