User's Manual

Elite Wireless XLR Adapter

The Elite Wireless XLR Adapter allows dynamic hand-held microphones to be used

with an Executive Elite system.

1. Earpiece jack — accepts a 2.5mm earpiece plug.

2. Battery door — push towards the back of the microphone to open

the battery compartment.

3. Li-Ion rechargeable battery — can be taken out and replaced after

opening the battery door. Replace batteries only with Revolabs

approved rechargeable batteries.

4. Battery charge status LED — warns for low battery. When there is

approximately 2 hours of talk time remaining, this LED will turn

yellow. When the LED turns red, there is approximately 1 hour of

charge remaining.

5. Mute LED — visual status for mute, un-mute, and pairing.

6. Mute button — press to mute, un-mute, and pair microphone.

7. Charging connector — connects to the charging pins of the Elite

charging tray.

8. XLR connector — male XLR connector, connecting to dynamic XLR

handheld microphones.