User's Manual

The Elite Wireless TA4 (mini XLR) Adapter for lapel and

ear-set microphones

The Elite Wireless TA4 (mini XLR) Adapter allows small lapel or over-the-ear

microphones to be used with an Executive Elite system.

1. Earpiece jack — accepts a

2.5mm earpiece plug.

2. Battery door — push towards

the back of the microphone to

open the battery

compartment.

3. Li-Ion rechargeable battery —

can be taken out and replaced

after opening the battery

door. Replace batteries only

with Revolabs approved

rechargeable batteries.

4. Battery charge status LED —

warns for low battery. When

there is approximately 2

hours of talk time remaining,

this LED will turn yellow.

When the LED turns red,

there is approximately 1 hour

of charge remaining.

5. Mute LED — visual status for mute, un-mute, and pairing.

6. Mute button — press to mute, un-mute, and pair microphone.

7. Clip — used to attach adapter to clothing or a belt.

8. Charging connector — connects to the charging pins of the Elite charging

tray.

9. TA4 (Mini XLR) connecter — use to connect a lapel or over-the-ear

microphone to the TA4 adapter. See picture below for the wiring of the

TA4 adapter.